SMOK GX350 Kit Review

Want create site? Find Free WordPress Themes and plugins.

Do you want a vaping kit that is both stylish and powerful? The Smok GX350 kit could just be what you’ve been looking for. This kit consists of the GX350 mod which can produce up to 350W as well as the popular TFV8 Cloud Beast tank. Whether you are after massive clouds or maximum flavor, this vape kit will do it for you.

The Smok GX350 kit is quite cheap considering its quality and performance. It costs about $70 in most vape stores. However, you can grab this kit for just $55 on

GX350 Mod

The GX350 Mod has a dimension of 58mm by 40.4mm by 84.5mm and features a tridimensional polygon design that makes it easier to fit in your grip. It can fit just about any tank you find on the market with a diameter of up to 25mm. You can fit a 30mm tank on it, but there may be a little overhang.

This mod can produce a whopping 350 watts. It is doubtful that you would ever need to vape at 350W. However, the power capacity is there. The GX350 runs on four 18650 batteries. The mod comes with a conversion door that allows you to use it with just two 18650 batteries. If you are using two batteries, the maximum wattage output of the mod is 220W. It has a very long battery life. You can use this vape kit for up to a week without charging it depending on how frequent you vape. The GX350 is much smaller than other mods on the market that can fit up to four 18650 batteries.

The GX350 has the typical Smok firing button on the side. The button is quite large, so you do not have to look for it when you want to take a hit. You also have the option of locking the button to avoid firing it accidentally.

There is a small OLED display on top of the mod that shows the usual information like resistance, temperature, as well as battery life. The screen is well situated so that you can see the settings that you’re vaping with each hit.

The GX350 Kit has a resistance range of 0.1 ohm to 3 ohms in wattage mode and 0.06 ohms to 2 ohms in temperature control mode. The mod supports a temperature range of 200 degrees Fahrenheit to 600 degrees Fahrenheit. It also has a TCR mode. You can use nickel, titanium, and stainless steel coils in temperature control mode.

TFV8 Cloud Beast Tank

The TFV8 Cloud Beast Tank is one of the best tanks from Smok. It has a dimension of 24.5mm by 69mm. There is a 510 thread connection at the base of the tank for attaching it to the mod. The tank has a capacity to hold up to 6ml of e-juice. This means you do not have to carry bottles of your favorite e-liquids around with you. The tank, which has a top fill design, does not leak. It is even even suitable for MAX VG e-liquids. To fill the tank, you simply need to press the top cap and move it counterclockwise to reveal the refill holes. The drip tip of this tank can be removed and you can fit any standard 510 drip tip on it.

The TFV8 Cloud Beast Tank comes pre-installed with a V8-T8 coil. There is a V8-Q4 coil in the package. Both coil heads have a maximum resistance of 0.15ohm. As you can expect from a tank named the Cloud Beast, the cloud production of the TFV8 is incredible. There are two large adjustable air flow slots at the base of the tank which gives you complete control over your vaping experience.

Overall, the GX350 Kit has an impressive performance. This is the kind of device that you can make your go-to vape kit.

Did you find apk for android? You can find new Free Android Games and apps.

You might also like More from author

Comments are closed.