How To Mix Your Own E Liquid

Want create site? Find Free WordPress Themes and plugins.

E-liquid is a mixture of water, flavorings, glycols and optional nicotine that is vaporized in the e-cigarette to produce inhaled vapors. It is available from a variety of sources and in a range of nicotine strengths varying from 0mg to 36mg of nicotine per ml. 15ml of e-liquid is approximately equivalent to 35 to 45 refill cartridges or about 300 tobacco cigarettes. Use 3 to 5 drops to fill up an empty cartridge then use the cartridge as normal. E-Liquids also come in a very large quantity of flavors, from tobacco-like flavors to fruity flavors, and even flower aromas.

Mixing Your own  E-Liquid

Mixing E-Liquid is pretty straight forward. You are simply mixing the base nicotine solution with a diluent (such as propylene glycol) and a flavoring (if required – How to Create Your First E-Cigarette Flavour). If you have purchased one of DIY E-Liquid mixing kits, you will have the equipment you need, such as empty dropper bottles, measuring instruments and a mixing beaker. These should be used solely for mixing e-liquids and always washed well after use.

NicVape’s E-liquid DIY Kit is a good way to start with a price of only $69.99!

This kit includes:

  • 25mg/ml diluted nicotine
  • 125ml of  PG or VG
  • Two  15ml of E-Flavors
  • Three 3ml pipettes
  • 10ml Luer-lock syringes
  • Four 14 gauge blunt tip needles
  • One 50ml graduated cylinder
  • Two 30ml beakers
  • Five pairs of nitrile gloves
  • Two 50ml LDPE  bottles(plastic) including dropper tips & child proof caps
  • Two 30ml LDPE  bottles(plastic) including dropper tips & child proof caps
  • Five 15ml LDPE  bottles(plastic) including dropper tips & child proof caps
  • Eight 10ml LDPE bottles(plastic) including dropper tips & child proof caps
  • Nineteen blank labels to finish

The quantities of ingredients (How to Get the Right Raw Ingredients)you use depend on the strength and amount of E-Liquid you want to make. Examples of strengths are as follows

  • Low 8mg (0.8% nicotine)
  • Medium 18mg (1.8%nicotine)
  • High 24mg (2.4% nicotine)

You can calculate measurements of various ingredients easily using E-Liquid Mixing Calculator. You will be able to make any amount of any strength that you desire. We will give you the quantities for some commonly made amounts and strengths for your convenience. If you are making small quantities, (recommended when you begin so that mistakes are not costly), then measuring in drops can be done. It is the ratio that matters. The ratio of nicotine solution (Elixir) to diluent (PG12 and flavoring) is what matters. That will result in a consistent strength of final pharmaceutical grade quality E-Liquid.

Mystical 3 pack Ejuice


It is very much according to taste and the strength of flavoring that you are using to give you the best results. The flavors that come with E Liquid Labs E Mixing Kit are quite strong, and you will probably find that using between 5-10% flavoring will be plenty to give you a nice taste to your e-juice. This may require some experimentation, which is why we suggest making small quantities at first.

If you are making a larger quantity, such as 30ml of e-liquid, then measuring in milliliters will save time. In E-liquid Labs DIY e-liquid mixing kit, you will find dropper bottles, a 3ml pipette (graduated at 0.5ml) and also for measuring smaller amounts, a 1ml syringe, graduated at 0.1ml.

Simply measure the ingredients and then mix them together well. If you are making larger quantities and putting them in small bottles, it would be best to use the mixing beaker. Otherwise, you can measure the ingredients directly into a dropper bottle and then shake well before using.

Here are three charts with the quantities of ingredients already calculated for quick reference. We have included a chart for making 10ml of e-liquid and a chart for making 30ml of e-liquid at low, medium and high strength, using 10% flavoring. For making different quantities and strengths please refer to the e-mixing calculator, where you can enter the strength and final amount of the e-liquid you want to make and the quantities will be automatically adjusted.

Quantities required to make 10ml of E-Liquid
Nicotine base (54mg Elixir) 1ml 3ml 4ml
Diluent (PG12) 8ml 6ml 5ml


1ml 1ml 1ml
Quantities required to make 30ml of E-Liquid
Nicotine base (54mg Elixir) 4ml 10ml 13ml
Diluent (PG12) 23ml 17ml 14ml
Flavouring (10%)


3ml 3ml 3ml

To make other quantities and strengths, please refer to the E-Liquid Calculator here.

Once you have made your e-liquid, store it in a cool dark place until use. Make sure to use the childproof caps provided and keep out of reach of children or pets. Use in the normal way, by dripping a few drops into the cartridge of your ENI (electronic cigarette).

Did you find apk for android? You can find new Free Android Games and apps.

You might also like More from author

Comments are closed.